arama
arama
Bağlantılar & Faydalı Linkler
  • Maviweb Tasarım
  • Sektörel Vitrin
    • ZİYARETÇİ SAYIMIZ

    Online : 3

    Bugün : 47

    Dün: 50

    Bu Ay : 921

    Toplam: 89475

    Necuron 700

    700

    Main application areas:

    • lay-up patterns and tools
    • deep-draw dies
    • RIM-tools
    • vac form tools
    • carbon fibre lay-up tools
    Main physical features:
    • very high temperature resistance
    • low coefficient of thermal expansion
    Technical data:
    Colour: light brown
    Shore D: approx. 67
    Coefficient of thermal expansion: approx. 40 x 10-6 K-1
    Temperature resistance: approx. 170°C
    Compressive strength: approx. 33 N/mm2
    Flexural strength: approx. 27 N/mm2
    Density: approx. 0.76 g/cm3
    Dimensions:
    1,520 x 600 x 50 mm

    Other dimensions available on request. 
     
    Processing:
    1. fine sanding with grade 320
    2. clean surfaces with alcohol
    3. heat to approx. 50 - 60°C
    4. apply laminating resin with cloth to fill pores, then wipe off only leaving a thin film
    5. after sealant is fully cured, sand down with grade 800
    6. apply vanish, demoulding agent, gel coat and laminate
    Adhesive: NECURON® K8T (temperature resistant up to 110°C) or any standard and compatible patternmaking adhesives/resins
    Cutting tools:
    metal-cutting tools
    data sheet (pdf format) for downloading
    safety data sheet (pdf format) for downloading