Necuron K6


Polyurethane based 2-component adhesive for

NECURON®-modeling materials specially designed for

NECURON® 540, 620, 651

Mixture-ratio A to B:
1 to 1 (by weight)
Pot life:
approx. 140-160 sec. at 20°C
Curing time:
approx. 25 - 30 minutes at 20°C
Technical data:
Colour: brown (similar to NECURON® 651)
Mix viscosity: 80 mPas (at about 25°C)
Stir part A well before use to ensure that it is completely homogenised. For best results, we recommend that both components have a temperature of at least 20°C before mixing. Add the correct amount of part B to the part A and stir for 15-30 seconds. Brush, spread or spray onto both bond surfaces and press together quickly. We recommend to clamp the glued surfaces together to ensure a perfect bond. Surfaces must be clean and free of dust. Apply thinly and evenly.
Subsequent machining:
Glued parts can be generally machined after 15 – 30 minutes clamping time at room temperature. Maintain temperature at a minimum  20°C during cure.
2 kg units (1 kg component A and 1 kg component B) will glue approx. 3 – 4 boards
Shelf life:
Shelf life approx. 6 months in well closed containers and a dry environment at a temperature of 20°C to 25°C - preferably in original packs.
Delivery/packing unit:
1.0 kg component A
1.0 kg component B
5.0 kg component A
5.0 kg component B
data sheet (pdf format) for downloading
safety data sheet (pdf format) for downloading
(component A)
safety data sheet (pdf format) for downloading
(component B)